10
504523
Before You Start . . .
Tools
For most installations, the basic tools you will need are:
Exhaust
Use rigid metal duct and exhaust the dryer to the outside
by the shortest route possible.
NOTE: For more detailed information, refer to
Section on Dryer Exhaust Requirements.
Electrical
• ELECTRIC DRYER
Dryer needs a 3 wire and ground, 120/240 or 120/208
Volt, 30Amp., 60 Hertz, AC single Phase electrical
supply.
• GAS DRYER
Dryer needs a 120 Volt, 15 Amp., 60 Hertz, polarized
3-slot effectively grounded receptacle.
NOTE: For more detailed information, refer to
Section on Electrical Requirements.
Gas
Dryer is equipped for Natural Gas with a 3/8"NPT gas
supply connection. For more detailed information, refer
to Section on Gas Requirements.
Location
Place the dryer on a solid floor with an adequate air
supply. For more detailed information, refer to Section on
Location Requirements.
D074IE1F
DUCT TAPE
TEFLON TAPE
WRENCH
LEVEL
SCREWDRIVERS
D333I
