81
Cleaning
Sequence
of
operations
Operations
Symbols
1
Remove the dispensing hose and immediately rinse it with very hot
water
2
Open the lid and take off the bucket turning it counterclockwise.
PAY ATTENTION NOT TO HIT THE TEMPERATURE PROBE
3
Wash the bucket and the stirrer with very hot water using a soft brush
Wash the sampling and addition plugs with very hot water
4
Place a container under the device
3
Remove the drain plug until the container is full
Drain the entire volume and rinse the vessel with very hot water
4
Disable the installation circuit breaker
Disconnect the plug from the power cord
5
Remove the carded cotton from its cage and clean it with 70° alcohol
6
Remove the cover seal and rinse it with very hot water
7
Leave the lid open until the next use and only fill the hot-water bath
before using the appliance
Do not put the bucket and drain plug back into the vessel until the
next use
Summary of Contents for MEDIAWEL 10
