Allen Sports XLT2 Instructional Owner'S Manual Download Page 1

INSTRUCTIONAL OWNER’S MANUAL

PRODUCT REGISTRATION:

 

 

MAKE SURE TO REGISTER YOUR PURCHASE AT 

 http://allensportsusa.com/about/product-registration 
 

TO QUALIFY FOR PRODUCT WARRANTY AND TO RECEIVE 

 

IMPORTANT PRODUCT NOTIFICATIONS

1

MODEL XLT2 BIKE TRAILER

Owner’s Manual should be kept for future reference

W

ARNING

W

ARNING

W

ARNING

W

ARNING

1. Completely read and understand Owner’s Manual before assembling or operating this product.

2. This product should be assembled by an adult

IMPORTANT SAFETY INFORMATION

 

•  Failure to follow these warnings and assembly instructions could result in serious injury or death!

 

•  Immediately discard all plastic bags and plastic wrapping materials!

 

•  Maximum weight capacity for this trailer is two (2) children at 100 pounds, max payload!

 

•  Never use this trailer/stroller if it becomes damaged!

 

•  To avoid serious injury, children should always wear the seat belt and the shoulder straps! 

 

•  Do not install a car seat or any other seating device not approved by the manufacturer inside the trailer!

 

•  A reflector that complies with CPSC regulations must be visible on the rear of trailer.

 

•  Never leave children unattended in or around this product!

 

•  Never allow children to assemble, fold, or disassemble this unit!

 

•  Accessories or parcels placed in trailer/stroller may cause it to become unstable!

 

•  Not for use with children under 12 months old! Children must be able to support their own heads!

 

•  Before riding, check that all parts are assembled according to the manufacturer instructions!   

 

 

Also, ensure that the trailer does not interfere with braking, pedaling, or steering of the bicycle!

 

•  Do not allow any of the child’s body, clothing, shoe laces, or toys to come into contact with moving parts!

 

•  Make no modifications to the trailer!

 

•  Tires should be inflated to 25-35 PSI for maximum comfort! Check tire pressure before each use!

 

•  Use a foot pump or hand pump to inflate tires! Pressurized air hoses can cause over inflation!

 

•  Periodically re-check all fasteners to make sure they are tight!

 

•  Clean trailer only with soap and water. Do not use solvents!

TOWING TIPS:
 

•   Make sure your bike brakes work properly! Braking distance is increased when pulling a trailer!

 

•   This trailer is wide! Allow extra clearance near curbs, signs, parked cars, and other obstacles!

 

•   A bicycle with trailer attached requires a wide turning radius! Do not turn sharply!

 

•   Children must wear an approved safety helmet when using this product in trailer mode!

 

•   Never remove protective canopy when pulling children in the trailer!

 

•   Always use the safety flag when pulling this trailer!

 

•   Do not ride over curbs! Avoid bumps and holes! Always signal your turns!

 

•   Use extra caution when turning on uneven pavement, and going downhill!

 

•   Not for use at high speeds! Do not exceed 10 MPH!

 

•   NEVER use this trailer at night!

 

•   Install a rearview mirror on your bike to check on children in trailer!

 

•  Dress children appropriately to prevent them from getting chilled or overheated while riding!  

 

 

Protect against wind-chill in cold temperatures, and provide adequate ventilation and hydration  

 

 

during warmer temperatures.

SAFETY TOWING TIPS

Summary of Contents for XLT2















Reviews: