Allen Engineering Corporation MSP470A Manual Download

Page: 34 / 120

053257 - 01/2014

SECTION 2

OPERATIONS

Page 2-2

Pre-Operating Instructions

Before operation each day ensure the following:

• All guards, side screens and panels are in place.

• All safety and information signs are in place and legible.

• Engine oil levels are correct.

• Hydraulic oil levels are correct.

• Check battery level

• Check all operating controls for proper operation and adjustment.

• Check speed control operation before and after starting engine for proper operation.

• Gearbox oil level. Add oil as required.

• The steering, left and right.

Note:

If there is any indication that faulty equipment exists, shutdown safely, inform the proper authority

and

DO NOT

operate the riding trowel until the problem has been

ﬁ

xed.

• Remove loose objects that could interfere with operation.

Summary of Contents for MSP470A

























































































































Search results

Summary of Contents for MSP470A

Reviews:

Related manuals for MSP470A

Brands by name

Popular brands

Allen Engineering Corporation MSP470A, Manual

Search results

Summary of Contents for MSP470A

Reviews:

Related manuals for MSP470A

Brands by name

Popular brands