72
Rockwell Automation Publication 750-UM006C-EN-P - March 2022
Chapter 4
Configure and Start Up the Drive
If you want a fault to occur in the system if a maximum speed or
maximum acceleration is exceeded, set values in the right column. This
is not safety related, it only pertains to operational limits..
9. Select the Scaling tab. If you plan to use the SXF command, enter the
value 4096 into the Position Scaling field.
10. Click Create or Apply.
Configure the Drive Parameters
Use the PowerFlex 755 Startup Wizard to create and configure the parameters
in the drive with the data that is collected in
Prepare for Initial Drive Startup
.
The PowerFlex 755 Startup Wizard has configuration options to configure the
drive parameters for the drive application. Some screens do not require
information now, but you must advance through all screens.
After completing