28
Rockwell Automation Publication 1789-UM002K-EN-P - January 2015
Chapter 2
What is the SoftLogix System?
2.
In the Select Module dialog box, select your module type and enter the
Slot number.
RSLinx software defaults to slot 0, but you can move it to another slot if
set up for this functionality. See
For this example, we will enter slot 1 for the 1789-L60
SoftLogix 5800 controller.
3.
Click OK.
The General dialog box appears.
4.
In the General dialog box, enter Startup Mode, Memory Size and Periodic
Save Interval values.
5.
Click Next.
The NT System dialog box appears.
6.
In the NT System dialog box, enter Continuous Task Dwell Time, CPU
Affinity, and Channel Serial Port values.
7.
Click Finish.
