8
SLC 5/03™, SLC 5/04™, and SLC 5/05™ Modular Processors
Publication 1747-IN009C-MU-P - December 2002
Load Your Software
Refer to your programming software documentation.
Establish Communication to the Processor
1.
Refer to the following table to establish communication between the processor and
your personal computer.
Processor:
Procedure:
SLC 5/03
Connect 1747-PIC from the processor to your personal computer serial port or use a
1784-KTX, -PKTX, or -PCMK interface, or a 1747-CP3 cable from channel 0 of the
processor to the personal computer serial port.
SLC 5/04
Connect a 1747-CP3 cable from channel 0 of the processor to the personal computer
serial port or use a 1784-KTX, -PKTX, or -PCMK interface.
SLC 5/05
Connect a 1747-CP3 cable from channel 0 of the processor to the personal computer
serial port. For Ethernet connection, connect channel 1 of the processor and the PC
Ethernet Card to an Ethernet hub using 10Base-T compatible cable.
(1)
(1)
Ethernet IP address must first be set via BOOTP or an RS-232 connection.
POWER
RUN
FLT
BATT
FORCE
DH485
RS232
POWER
RUN
FLT
BATT
FORCE
DH+
RS232
POWER
RUN
FLT
BATT
FORCE
ENET
RS232
Power Supply and LED Indicators
Indicates the LED is OFF
Indicates the LED is ON
Indicates the LED is FLASHING
Status of LED does not matter
SLC 5/05
SLC 5/04
SLC 5/03
