Rockwell Automation Publication 20D-RN047A-EN-P - October 2019
2
Determine the Firmware
Revision
This section describes procedures to determine the firmware revision of your
PowerFlex 700S Phase II drive. Use one of these methods to determine the
firmware revision.
Use the LCD Human Interface Module (HIM)
Step
Key(s)
Example Screens
1. In the main menu, press the Up Arrow or Down
Arrow to scroll to
Device Select
(as shown in the
example to the right).
2. Press Enter to enter your selection.
3. Press the Up Arrow or Down Arrow to scroll to the
PowerFlex 700S 2 drive.
4. Press Enter to select the drive. The main menu for
the drive displays.
5. Press the Up Arrow or Down Arrow to scroll to
Diagnostics
(as shown in the example to the
right).
6. Press Enter to enter your selection.
7. Press the Up Arrow or Down Arrow to scroll to
Device Version
.
8. Press Enter to display the Product Data screen.
9. Press Enter again to display the firmware version of
the drive (as shown in the example to the right).
or
or
or
or
F-> Stopped
Auto
0.00
RPM
Main Menu:
Diagnostics
Parameter
Device Select
F-> Stopped
Auto
Main Menu:
Diagnostics
Parameter
Device Select
F-> Stopped
Auto
Diag. Product Ver
FW Ver: 6.003
Series: A
Date: 01/26/2016
