Allen-Bradley PowerFlex 20-HIM-A6, User Manual

Page: 61 / 74

Rockwell Automation Publication 20HIM-UM001E-EN-P - May 2017 61
Using the HIM Chapter 4
Disabling Access Code Protection
1. Access the Status screen (see Figure 6 ).
2. If Port 00 (host drive) is not shown above the ESC
soft key
, use the
or key to scroll to Port 00.
3.
Press the key to display its last-viewed folder.
4.
Use the or key to scroll to the PROPERTIES folder.
5. Use the or key to select Log In .
6. Press the (Enter) key to display the Enter Password popup box.
7. Use the numeric keys to enter the existing access code value.
Use the
soft key
to delete an erroneous entry.
8. Press the ENTER
soft key
to enter the existing access code.
9. Use the or key to select Change Password.
10. Press the (Enter) key to display the Enter New Password popup box.
11. Use the numeric keys and the
soft key
to enter ‘0’, the default value to
disable the access code protection feature.
12. Press the ENTER
soft key
to enter the ‘0’ (disable) default value.
13.
After the access code protection verification popup box appears, confirm
the new access code by re-entering ‘0’.
14.
Press the ENTER soft key to disable access code protection.
ESC ENTER
Stopped
0.00 Hz
AUTO
F
Enter Password
0
0 << 65535
ESC ENTER
Stopped
0.00 Hz
AUTO
F
Enter New Password
0
0 << 65535