manualshive.com logo in svg

Allen-Bradley PowerFlex 20-COMM-P, User Manual, Page: 6 / 117

Share
Download
Allen-Bradley PowerFlex 20-COMM-P User Manual Download Page 6

P-2

About This Manual

The following conventions are used throughout this manual:

•

Parameter names are shown in the following format 

Parameter xxx 

- [*]

. The xxx represents the parameter number. The * represents the 

parameter name. For example 

Parameter 01 - [DPI Port]

.

•

Menu commands are shown in bold type face and follow the format 

Menu > Command

. For example, if you read “Select 

File > Open

,” 

you should click the 

File

 menu and then click the 

Open

 command.

•

The firmware release is displayed as FRN X.xxx. The “FRN” 
signifies Firmware Release Number. The “X” is the major release 
number. The “xxx” is the minor update number. This manual is for 
Firmware release 1.xxx.

•

This manual provides information about the PROFIBUS adapter and 
using it with PowerFlex drives. The adapter can be used with other 
products that implement DPI. Refer to the documentation for your 
product for specific information about how it works with the adapter.

Rockwell Automation offers support services worldwide, with over 75 
sales/support offices, over 500 authorized distributors, and over 250 
authorized systems integrators located through the United States alone. 
In addition, Rockwell Automation representatives are in every major 
country in the world.

Local Product Support

Contact your local Rockwell Automation representative for sales and 
order support, product technical training, warranty support, and support 
service agreements.

Technical Product Assistance

If you need to contact Rockwell Automation for technical assistance, 
please review the information in 

Chapter 7

, 

Troubleshooting

 first. If you 

still have problems, then call your local Rockwell Automation 
representative.

Conventions Used in this Manual

Rockwell Automation Support

20COMM-UM006A-EN-P.book  Page 2  Friday, September 28, 2001  10:43 AM

Summary of Contents for PowerFlex 20-COMM-P






















































































































Reviews:

No comments