Allen-Bradley PowerFlex 20-COMM-D, User Manual, Page: 19 / 149

Installing the Adapter 2-5
4. Mount the adapter on the drive, using the four captive screws to
secure it in place and ground it to the drive.
Important: On a PowerFlex 700 drive, tighten the screw in the lower
left hole to ground the adapter.
On a PowerFlex 70 drive, tighten the screw in the lower
right hole to ground the adapter.
Figure 2.5 Mounting the Adapter
PowerFlex 700 Drive (0 - 1 Frames)
Adapter mounts on door. PowerFlex 700 Drive (2 Frame & Larger)
Adapter mounts in drive.
PowerFlex 70 Drive
Adapter mounts in drive.