Allen-Bradley PowerFlex 20-comm-c FRN 1. Series, User Manual

Page: 24 / 159

2-6 Installing the Adapter
1. Close the door or reinstall the cover on the drive. The status
indicators can be viewed on the front of the drive after power has
been applied.
2. Apply power to the PowerFlex drive. The adapter receives its power
from the connected drive. When you apply power to the product for
the first time, the status indicators should be green or off after an
initialization. If the status indicators go red, refer to
Chapter 7 ,
Troubleshooting .
3. Apply power to the master device and other devices on the network.
Applying Power
!
ATTENTION: Risk of equipment damage, injury, or death exists.
Unpredictable operation may occur if you fail to verify that parameter
settings and switch settings are compatible with your application.
Verify that settings are compatible with your application before
applying power to the drive.
20COMM-UM003A-EN-P.book Page 6 Wednesday, November 7, 2001 3:46 PM