Rockwell Automation Publication 2198-UM002E-EN-P - February 2018
309
Upgrade the Drive Firmware
Appendix B
Configure Logix5000 Controller Communication
This procedure assumes that your communication method to the
LOGIX 5000 controller is the Ethernet network. It also assumes that your
LOGIX 5000 Ethernet module or controller has already been configured.
For more controller information, refer to
.
Follow these steps to configure Logix5000 controller communication.
1.
Open your RSLinx Classic software.
2.
From the Communications menu, choose Configure Drivers.
The Configure Drivers dialog box appears.
3.
From the Available Driver Types pull-down menu, choose Ethernet
devices.
4.
Click Add New.
The Add New RSLinx Classic Driver dialog box appears.
5.
Type the new driver name.
6.
Click OK.
The Configure driver dialog box appears.