Rockwell Automation Publication 2097-UM001D-EN-P - November 2012
135
Configure and Start Up the Kinetix 300 Drive
Chapter 6
Configure the Ethernet Module
This section applies when the ControlLogix controller, catalog number 1756-
ENET/B, is used.
Follow these steps to configure the Ethernet module.
1.
Right-click I/O Configuration in
the Controller Organizer and
choose New Module.
The Select Module dialog box opens.
2.
Expand the Communications category and select 1756-Exx/x appropriate
for your actual hardware configuration.
In this example, the 1756-ENET/B module is chosen.
3.
Click OK.
The New Module dialog box opens.