Allen-Bradley DeviceNet 1784-PCIDS, User Manual, Page: 64 / 101

Publication 1784-6.5.30 - February 2001
5-6 Using IOLinx To Test the Example Network
Using the IOLinx Device Status Screen
The Device Status screen displays an Idle/Failure Table where you
can double-click on a node to see its status, including MAC ID, status
code, and status info (e.g., device stopped communicating).
Make sure that there are no failures (“F”) indicated for the devices on
your network (e.g., the 1784-PCIDS card at node 0, the RediSTATION
at node 7, and the photoeye at node 9). If you do see an “F”,
double-click on it to read the error message.
Note: If you double-click on an empty node, you see the response
“OK or not in scan list.”