6
Universal Disconnect Switch Installation Instructions (600A)
4
3
ATTENTION:
CHECK FOR PROPER OPERATION.
Handle Mechanism Installation (Cont'd)
4
Turn disconnect handle "OFF" and install handle
mechanism spring.
Connecting Rod Adjustment Procedure
Move disconnect handle to the "ON" position.
If switch does not fully close, return handle to "OFF" position.
Remove link spring and hitch pin to disengage the connecting
rod from the primary link.
Turn connecting rod counter-clockwise (1 or more) full turns.
Re-engage connecting rod in primary link of handle, insert hitch
pin and re-test.
Repeat
-
as necessary.
Re-install link spring.
Install hitch pin clip
Hitch Pin
Clip
Drive Bar
1
2
3
4
5
6
7
1
5
Move disconnect handle to the "OFF" position.
If switch does not fully open, return handle to "ON" position.
Remove link spring and hitch pin to disengage the connecting
rod from the primary link.
Turn connecting rod clockwise (1 or more) full turns.
Re-engage connecting rod in primary link of handle, insert hitch pin and
re-test.
Repeat
-
as necessary.
Re-install link spring.
1
2
3
4
5
6
7
1
5
Adjustment Procedure if switch does not turn "ON".
Adjustment Procedure if switch does not turn "OFF".
Rod Operated Adjustment
Cable Operated Adjustment
Publication
1494V-IN028A-EN-P - March 2018