4–12
Configuring the KFC15/KFCD15 Module
Publication 17706.5.20 - June 1997
Exit without Saving
To exit without saving while in the main menu:
•
Press
EXIT
.
The KFC15/KFCD15 module returns to run mode from
configuration mode without saving any changes. This ends the
configuration session and the previous settings will remain in
effect.
To return to the main menu from the sub-menu:
•
Press
EXIT
.
You can move between the two menus as much as you need to
during any given configuration session.
If you exit from the main menu without saving, as described above,
any changes made in the sub-menu are not saved. If you save and
exit from the main menu, changes made in the sub-menu are saved
as well.
Important:
If the KFC15/KFCD15 module is left inactive (i.e., with
no buttons pressed) in configuration mode for 3
minutes, it returns to run mode. Any changes made
since going into configuration mode will not be saved.
Also, if power to the unit is interrupted while in
configuration mode, any changes made will not be
saved.