Installing the KFC15/KFCD15 Module
3–5
Publication 17706.5.20 - June 1997
Connecting a Device to the Network Access Port
Use the isolated network access port to connect a transitory device,
such as a programming device, to the KFC15/KFCD15 module.
Cables
You must use the Allen-Bradley Network Access Cable (Cat. No.
1786-CP).
Connecting to the AC Power Supply (KFC15)
The KFC15 module contains an internal transformer that allows you
to switch between 115V ac or 230V ac at 60 HZ or 50 Hz
respectively.
!
ATTENTION: The KFC15 module does not have an
ON/OFF switch so power is applied to the module as
soon as you plug it in. For this reason you must select
the voltage before plugging in the KFC15 module to
prevent damaging the unit.