Allen-Bradley controllogix 1756-L55M12, User Manual

Page: 78 / 142

Publication 1756-UM001G-EN-P - January 2007
78 Develop Applications
Interrupt the Execution of Logic and Execute the Fault Handler
To interrupt the execution of logic and execute the fault handler,
perform this procedure.
1. In the Controller Organizer of RSLogix 5000 programming
software, right-click the module and select Properties.
The Module Properties dialog appears.
2. Click the Connection tab.
3. Select the Major Fault If Connection Fails While in Run Mode
check box.
4. Develop a routine for the Controller Fault Handler.