Publication 1756-UM050A-EN-P - December 2001
7-8
Using Produced and Consumed Tags
Create the Consumer
Application
In order to test the messaging application you have to create a
consumer application, add the producer to the I/O configuration of
the consumer, and create a consumed tag to receive the data.
Create the Consumer Controller
Perform the following steps to create the consumer controller:
1.
Open a second
session of
RSLogix5000
(leave the current session
running).
2.
From the
File
menu, select
New
.
The
New Controller
window will open.
3.
Enter an appropriate
Name
for the Controller, e.g., “Consumer.”
4.
Select the correct
Chassis Type
and
Slot Number
of the controller,
and the folder where you want to save the project file (
Create In
).
5.
Click on
OK
to save the project file.
Summary of Contents for ControlLogix 1756-ENBT
