manualshive.com logo in svg

Allen-Bradley ControlLogix 1756-DH485, User Manual, Page: 11 / 110

Share
Download
Allen-Bradley ControlLogix 1756-DH485 User Manual Download Page 11

Publication 1756-UM532A-EN-P - May 2006

1756-DH485 Module Overview        

1-3

External Features of the 1756-DH485 Module

Prevent Electrostatic 
Discharge

The DH-485 module is sensitive to electrostatic discharge.

Channel B 
Connector

Channel A 
Connector

Channel 
and 
Module 
Status 
Indicators

43842

Backplane 
Connector

Alphanumeric 
Status Indicator

Door
Label

ATTENTION

!

This equipment is sensitive to electrostatic discharge, which 
can cause internal damage and affect normal operation. 
Follow these guidelines when you handle this equipment:

•

Touch a grounded object to discharge potential static.

•

Wear an approved grounding wriststrap.

•

Do not touch connectors or pins on component 
boards.

•

Do not touch circuit components inside the equipment.

•

Use a static-safe workstation, if available.

•

Store the equipment in appropriate static-safe 
packaging when not in use,.

Summary of Contents for ControlLogix 1756-DH485















































































































Reviews:

No comments