Allen-Bradley armorstratix 5700, User Manual, Page: 278 / 458

278 Rockwell Automation Publication 1783-UM007I-EN-P - December 2017
Chapter 3 Configure Switch Features
Management VLAN
VLAN 1 is the default VLAN and also the management VLAN. After the
initial setup, you can create VLANs and designate any VLAN on the switch as
the management VLAN. The management VLAN provides administrative
access to the switch. You must assign one of the switch ports to the
management VLAN. Otherwise, you do not have administrative access to the
switch. You can assign a management VLAN on the Express Setup page in
either Device Manager or the Logix Designer application.
Configure VLANs via Device Manager
From the Configure menu, choose VLAN Management.
You can add, edit, and delete VLANs.
To assign a VLAN to a port when applying a Smartport role, see page 264 .
To assign a VLAN to a port from the Port Settings page, see page 49 .
Configure VLANs via the Logix Designer Application
VLAN configuration via the Logix Designer application is available for only
Stratix 5400, Stratix 5410, Stratix 5700, and ArmorStratix 5700 switches.
In the navigation pane, click Smarports & VLANs.
In the VLAN Configuration area, you can add, edit, and delete VLANs.