manualshive.com logo in svg

Allen-Bradley armorstratix 5700, User Manual, Page: 192 / 458

Share
Download
Allen-Bradley armorstratix 5700 User Manual Download Page 192

192

Rockwell Automation Publication 1783-UM007I-EN-P - December 2017

Chapter 3

   Configure Switch Features

Configure NAT via the Logix Designer Application 
(Stratix 5410 Switches)

In the navigation pane, click NAT.

Table 74 - NAT Fields 

Field

Description

Instance Name

Displays the unique name of the NAT instance.

Port Type

Identifies the port type as either uplink or downlink:

•

Ports 1…24 are downlink ports.

•

Ports 25…28 are uplink ports.

Ports

Identifies the port numbers that are assigned to each NAT instance.

VLANs

Displays the VLANs assigned to each NAT instance on port listed in the Port column.

Delete

Click to delete a NAT instance permanently. The switch deletes the instance when you click Set.

Edit

Click to modify the configuration of a NAT instance.

Diagnostics

Click to view translation diagnostics for an instance. See 

Monitor NAT Statistics via the Logix Designer Application on page 310

.

Global Diagnostics

Total Translations

Displays the total number of translations across all NAT instances. 

Total Translations 

(Gi1/1-Gi1/6, Gi1/13-Gi1/18)

Displays the total number of translations across port ranges Gi1/1…Gi1/6 and Gi1/13…Gi1/18. These ranges can include a 
combined maximum of 128 translations.

Total Translations 

(Gi1/7-Gi1/12, Gi1/19-Gi1/24, Te1/25-Te1/28)

Displays the total number of translations across port ranges Gi1/7…Gi1/12, Gi1/19…Gi1/24 and Te1/25…Te1/28. These ranges 
can include a combined maximum of 128 translations.

Total Translated Packets

Displays the total number of translated packets across all NAT instances.

Total Untranslated Packets

Displays the total number of packets that have passed throughl all NAT instances without being translated.

Summary of Contents for armorstratix 5700











































































































































































































































































































































































































































































Reviews:

No comments