
90
Rockwell Automation Publication 442L-UM005B-EN-P - April 2017
Chapter 11
Technical Specifications
Table 23 - OSSD Specifications
Table 24 - Configuration and Diagnostics Interface Specifications
Attribute
442L-SFZNMN
Output signal switching device pair
2 PNP semiconductors, short-circuit protected
(5)
,
cross-circuit monitored
(5) Applies to the voltage range between V
S
and 0V.
Safe state in case of error
At least one OSSD is in the OFF state.
HIGH switching voltage at 250 mA
V
S
– 2.7 V…V
S
Switching voltage LOW
0…2 V (0V, typical)
Source switching current
(1)
(1) Switching currents up to 500 mA are allowed briefly (≤100 ms).
6…250 mA
Leakage current
(2)
(2) In the case of a fault (0V cable open circuit) maximally the leakage current flows in the OSSD cable. The downstream controller
must detect this status as LOW. An FPLC (fail-safe programmable logic controller) must be able to identify this status.
250 µA
Load inductance
2.2 H
Load capacity
2.2 µF at 50 Ω
Switching sequence (without switching
5 ¹/s
Permissible cable resistance
(3)
(3) Make sure to limit the individual line core resistance to the downstream controller to this value to confirm that a cross-circuit
between the outputs is safely detected. (Also note EN 60 204-1.)
2.5 Ω
Test pulse width
(4)
(4) When active, the outputs are tested cyclically (brief LOW). When selecting the downstream controllers, make sure that the test
signals do not result in deactivation.
230…300 ms
Test frequency
120 ms
Power-up delay of the OSSDs from red to green
120 ms
Time offset on switching the OSSDs between OSSD2 and
OSSD1
2 ms
Attribute
442L-SFZNMN
Communication protocol
RS-232 (proprietary)
Transmission speed
38400 Bauds
Cable length at 38400 Baud and 0.25 mm² cables
15 m (49 ft)
Galvanic isolation
No
Output TxD HIGH
5…15 V
Output TxD LOW
-15…-5 V
Voltage range RxD
-15…+15 V
Switching threshold RxD LOW
-15…+0.4 V
Switching threshold RxD HIGH
2.4…15 V
Short-circuit current at TxD
-60…+60 mA
Max. voltage level at RxD
-15…+15 V
Max. voltage level at TxD
-11…+11 V
Summary of Contents for 442L-SFZNMN
Page 1: ...SafeZone Mini Safety Laser Scanner Catalog Number 442L SFZNMN User Manual OriginalInstructions...
Page 10: ...10 Rockwell Automation Publication 442L UM005B EN P April 2017 Preface Notes...
Page 60: ...60 Rockwell Automation Publication 442L UM005B EN P April 2017 Chapter 4 Mounting Notes...
Page 107: ......