Allen-Bradley 2715-15CA, User Manual

Page: 75 / 106

Rockwell Automation Publication 2715-UM001A-EN-P - July 2015 75
Chapter
5
Install and Replace Components
Topic Page
Connect to USB Ports 76
Insert an SD Card 77
Replace the Battery 78
Install a Protective Overlay 80
ATTENTION: Prevent Electrostatic Discharge (ESD)
This equipment is sensitive to electrostatic discharge, which can cause internal
damage and affect normal operation.
Follow these guidelines when you handle this equipment:
• Touch a grounded object to discharge potential static.
• Wear an approved grounding wriststrap.
• Do not touch connectors or pins on component boards.
• Use a static-safe workstation, if available.
ATTENTION: Disconnect all power before you install or replace any
components. Failure to disconnect power can result in electrical shock or
damage to the terminal.
At the end of its life, collect this equipment separately from any unsorted
municipal waste.