Allen-Bradley 1788-CN2FFR, User Manual, Page: 56 / 104

54 Rockwell Automation Publication 1788-UM057B-EN-P - September 2014
Chapter 3 Logix Assemblies
PVBinary1…PVBinary8
For a field device that requires an output, the data must be updated in the output
image of that field device. If the data type for the connector is set to
Boolean ,
then the data for that connector is read from the binary value in the output
image.
PVStatus1…PVStatus8
If the connector for the PV output is set to have a status, you must put a status in
the output image that will be sent with the process variable.
Figure 10 - Example of Field Device Output Screen
PV Status Status
PVStatus
≥
0x80 Green = good
0x40
≤
PVStatus < 0x80 Orange = uncertain
PVStatus < 0x40 Red = bad