Allen-Bradley 1756-PA30XT Original Instructions Manual Download Page 10

10

Rockwell Automation Publication 1756-IN619E-EN-P - September 2019

ControlLogix Power Supply

Specifications

Attribute

1756-PA72, 
1756-PA72K

1756-PA75, 
1756-PA75K

1756-PB72, 
1756-PB72K

1756-PB75, 
1756-PB75K

1756-PC75

1756-PH75, 
1756-PH75K

Voltage and current ratings 

Input

120/240V AC, 
50/60 Hz, 100VA, 
100 W

120/240V AC, 
50/60 Hz, 100VA, 
100 W

24V DC, 95 W

24V DC, 95 W

48V DC, 95 W

125V DC, 95 W

Output (current capacity)

2.8 A, 24V DC; 
10.0 A, 5.1V DC; 
4.0 A, 3.3V DC; 
1.5 A, 1.2V DC; 
75 W max, 
20 A inrush max

2.8 A, 24V DC; 
13.0 A, 5.1V DC; 
4.0 A, 3.3V DC; 
1.5 A, 1.2V DC; 
75 W max, 
20 A inrush max

2.8 A, 24V DC; 
10.0 A, 5.1V DC; 
4.0 A, 3.3V DC; 
1.5A, 1.2V DC; 
75 W max, 
30 A inrush max

2.8 A, 24V DC; 
13.0 A, 5.1V DC; 
4.0 A, 3.3V DC; 
1.5 A, 1.2V DC; 
75 W max, 
30 A inrush max

2.8 A, 24V DC; 
13.0 A, 5.1V DC; 
4.0 A, 3.3V DC; 
1.5 A, 1.2V DC; 
75 W max, 
30 A inrush max

2.8 A, 24V DC; 
13.0 A, 5.1V DC; 
4.0 A, 3.3V DC; 
1.5 A, 1.2V DC; 
75 W max, 
30 A inrush max

Isolation voltage

250V (continuous), Reinforced Insulation Type, Power Input to Backplane

Temperature, operating
IEC 60068-2-1 (Test Ad, Operating Cold),
IEC 60068-2-2 (Test Bd, Operating Dry Heat),
IEC 60068-2-14 (Test Nb, Operating Thermal Shock)

0 °C < Ta < +60 °C (+32 °F < Ta < 140 °F)

Temperature, surrounding air, max

60 °C (140 °F)

Enclosure type rating

None (open-style)

Torque

0.565 N•m (5 lb•in)

Dimensions (HxWxD), approx

14.0 x 11.2 x 14.5 cm (5.51 x 4.41 x 5.71 in.)

Wire size

2.5 mm2 (14 AWG) solid or stranded copper wire rated at 90 °C (194 °F), or greater, 1.2 mm (3/64 in.) insulation max

North American temperature code

T4

ATEX temperature code

-

T4

-

IECEx temperature code

-

T4

-

Attribute

1756-PA50, 1756-PA50K

1756-PB50, 1756-PB50K

Voltage and current ratings

Input

120/240V AC, 50/60 Hz, 
81 W (90VA), 50 °C (122 °F), 
68 W (77VA), 60 °C (140 °F)

24V DC; 
50 °C (122 °F), 85 W; 
60 °C (140 °F), 70 W

Output (current capacity)

2.5 A, 24V DC;
8.0 A, 5.1V DC;
2.0 A, 3.3V DC;
1.5 A, 1.2V DC; 
50 °C (122 °F), 60 W max; 
60 °C (140 °F), 50 W max; 
20 A inrush max

2.5 A, 24V DC; 
8.0 A, 5.1V DC; 
2.0 A, 3.3V DC; 
1.5 A, 1.2V DC; 
50 °C (122 °F), 60 W max; 
60 °C (140 °F), 50 W max; 
20 A inrush max

Isolation voltage

250V (continuous), Reinforced Insulation Type, Power Input to Backplane

Temperature, operating
IEC 60068-2-1 (Test Ad, Operating Cold),
IEC 60068-2-2 (Test Bd, Operating Dry Heat),
IEC 60068-2-14 (Test Nb, Operating Thermal Shock)

0 °C < Ta < +60 °C (+32 °F < Ta < +140 °F)

Temperature, surrounding air, max

60 °C (140 °F)

Enclosure type rating

None (open-style)

Torque

0.565 N•m (5 lb•in)

Dimensions (HxWxD), approx

14.0 x 7.8 x 14.5 cm (5.51 x 3.07 x 5.71 in.)

Wire size

2.5 mm2 (14 AWG) solid or stranded copper wire rated at 90 °C (194 °F), or greater, 1.2 mm (3/64 in.) insulation max

North American temperature code

T4

ATEX temperature code

-

T4

IECEx temperature code

-

T4

Summary of Contents for 1756-PA30XT













Reviews: