Rockwell Automation Publication 1734-UM013C-EN-P - August 2010
81
Configure the Module in a GuardLogix Controller
Chapter
6
12.
From the Input Data pull-down menu, choose the appropriate method for
the output module, None.
13.
From the Output Data pull-down menu, choose the appropriate method
for the output module from the following options.
14.
From the Input Status pull-down menu, choose the appropriate method
for the output module from the following options:
Choose
Description
None
This is an output-only safety module. None is the only
valid selection.
Choose
Description
Safety
Automatically selected when Configured By = This
controller. Results in an output connection. Selecting
Safety creates output tags and enables these outputs for
use in the Safety Task.
None
Automatically selected when Configured By = External.
Selecting None results in an input only connection to the
module. Status is read, but no outputs are written.
Choose
Description
None
There are no status tags, only data for the outputs.
Pt. Status
There is one status tag for each output point.