Allen-Bradley 1440-SDM02-01RA, User Manual, Page: 140 / 168

138 Rockwell Automation Publication 1440-UM001D-EN-P - September 2016
Appendix B CIP Objects
Services
Band Measurement
Object (Class ID 31E
H
)
The Band Measurement Object models the measurement of the amplitude of a
signal within a narrow frequency range.
Class Attributes
The Band Measurement Object provides no class attributes.
Instances
There are 10 instances of this object. Instances 1…8 are the Band
measurements that are derived from the spectrum data. Instances 9 and 10 are
the Band Pass measurements that are performed in Band Pass Filter
measurement mode.
Table 63 - Alarm Object Services
Service
Code Class/Instance Usage Name Description
0E
h
Instance Get_Attribute_Single Returns one attribute.
10
h
Instance Set_Attribute_Single Sets one attribute.
(1)
(1) Attributes can only be set while the device is in Program mode. See the description of the Device Mode Object for more
information.
Table 64 - Band Measurement Object Instances
Instance Description
1 Channel 1 Band Measurement #1
2 Channel 2 Band Measurement #1
3 Channel 1 Band Measurement #2
4 Channel 2 Band Measurement #2
5 Channel 1 Band Measurement #3
6 Channel 2 Band Measurement #3
7 Channel 1 Band Measurement #4
8 Channel 2 Band Measurement #4
9 Channel 1 Band Pass Measurement
10 Channel 2 Band Pass Measurement