Rockwell Automation Publication 1407-UM002B-EN-P - February 2019
87
CGCM-DLR Unit Configuration
Chapter
4
18.
Click Download to confirm.
The IP address of the CGCM-DLR unit has now been successfully
configured.
Device Setup
You must configure the CGCM-DLR unit for the unit to function.
Configuration pages in the module set-up dialog box divide the required
information into subcategories. Evaluate the system and generator information to
determine the appropriate configuration settings, select the applicable
configuration page from the navigation tree, and use the configuration pages to
enter the settings.
IMPORTANT
To use the controller in this example on the Enterprise network,
readdress the controller with the CGCM-DLR unit. Or, use another
controller that is already on the Enterprise network.
TIP
Some dialog boxes that are shown in this document can vary slightly
from the Studio 5000 Logix Designer application that is provided. Review
each dialog box carefully.