Allen-Bradley 1203-SSS, User Manual

Page: 35 / 44

FLASH Updates
C-3
7. Click Send. A dialog box appears to report the progress of the
download. When it is complete, the message “Operation Complete”
flashes, and then the main menu appears.
Troubleshooting Potential FLASH Problems
Description Corrective Action
“Transfer Cancelled by Remote
System” message appears and the
FLASH is not completed.
•
Restart HyperTerminal and redo the FLASH
procedure. Try this a couple times.
•
Download a HyperTerminal PE update from
the Hilgraeve (http://www.hilgraeve.com).
Then, perform the FLASH procedure.
The X-Transfer Send for dialog box
appears, but the FLASH file is not
transferred.
•
Verify that you have selected the Xmodem
protocol in the Send file dialog box.
•
Verify that the new file is on you hard disk.
Do not attempt to FLASH from a floppy disk.
•
Verify that you are sending the file within 60
seconds of pressing Y to confirm that you
want to perform the FLASH.
After completing a FLASH, you are
unable to communicate with the
converter. For example, meaningless
text appears on the HyperTerminal
screen.
•
Set the serial port rate to 9600. If parameters
are changed during a FLASH update, all
parameters are set to their default settings.
Allen-Bradley