ALLEN & HEATH Qu-16 Reference Manual Download Page 69

Page: 69 / 92

Qu Mixer Reference Guide

AP9372 iss.9

11.10

Control Setup - Preferences

This screen presents user preferences for the control

surface. Set these according to how you prefer to

work.

These settings are stored with Show files. They are not

stored in Scenes.

PEQ Graph Fill – When turned On, the processing

screen PEQ graph displays a colour fill. There are 4

colours which match the frequency bands.

The system reset default is the Fill option turned On.

Processing Screens Follow Surface – When turned

On, adjusting a processing screen physical control

(rotary or key) will cause the screen to open the

related processing view.

This function is available only while the

Processing

screen is active.

This option does not apply to Qu-Pac.

The system reset default is the Follow Surface option

turned Off.

Summary of Contents for Qu-16





























































































Search results

Summary of Contents for Qu-16

Reviews:

Related manuals for Qu-16

Brands by name

Popular brands

ALLEN & HEATH Qu-16, Reference Manual

Search results

Summary of Contents for Qu-16

Reviews:

Related manuals for Qu-16

Brands by name

Popular brands