ALLEN & HEATH Qu-16 Reference Manual Download Page 27

Page: 27 / 92

Qu Mixer Reference Guide

AP9372 iss.9

Note on Qu-SB



Please refer to the Qu-SB Getting Started Guide AP10287 for an operational

overview of the mixer. The guide can be downloaded from the

Allen & Heath

website



The following chapters reference the Qu-16, Qu-24, Qu-32 and Qu-Pac

Touchscreens. However the functions listed are also available on Qu-SB and can be

controlled via the Qu-Pad iPad app, often with a similar menu structure. Refer to the

embedded Qu-Pad Help for information on using the app.

Processing and Mix Functions

9.1

Channel Naming

Qu channels, FX, mixes and groups can be named using the screen keypad by touching the pencil icon.

The following can be named: Mono input channels, Stereo input channels, FX Returns, FX Sends, Mix,

LR, Groups, Matrix, Mute Groups, DCA Groups.

Channel names

The name is displayed at the top left of the

Processing

and

Routing

screens. The name can be

edited from the

Processing

screen.

The pencil icon appears when the name is blank. All

names are cleared when the Qu mixer is reset or the

‘Reset Mix Settings’ scene is recalled.

Touch the name box to open the screen keypad and

edit the name.

Names can have up to 6 characters.

Touch the Shift button to type in an uppercase

character. Touch the button twice for Caps Lock.

Mute and DCA Group names

Open the

Routing

screen

key

Mute/DCA

page to

view the Mute and DCA Group masters. Their names

are displayed.

Touch a name box to open the screen keypad and edit

the name.

Names in Qu-Pad, Qu-Control and Qu-

You apps

Names stored in the Qu mixer are displayed in the Qu-

Pad, Qu-Control and Qu-You apps. These can also be

edited within the Qu-Pad app.

Names and Scene memories

Names are stored as part of the Qu mixer Scene

memories.

You can block or allow names in Scene recall using

the Global and per scene Filters. Three filter items

affect names:



Input/FX Names – CH, ST, Groups and FX Returns



Output Names – FX Sends, Mix, LR, Matrix



Mute/DCA Grp Masters – Mute and DCA names

Summary of Contents for Qu-16





























































































Search results

Summary of Contents for Qu-16

Reviews:

Related manuals for Qu-16

Brands by name

Popular brands

ALLEN & HEATH Qu-16, Reference Manual

Search results

Summary of Contents for Qu-16

Reviews:

Related manuals for Qu-16

Brands by name

Popular brands