ALLEN & HEATH Qu-16 Reference Manual Download Page 25

Page: 25 / 92

Qu Mixer Reference Guide

AP9372 iss.9

Qu-Pac Operational Overview

This section provides an overview of the Qu-Pac faderless mixer layout and operation to help you get

started quickly.

Touch Screen

- All live mixing, setup and memory management functions can be

controlled from the Qu-Pac front panel. The colour touch screen provides quick

access to these functions. The top presents tabs for the available pages. The bottom

presents a toolbar showing status information.

Screen Rotary

- Adjusts the value of parameters on screen. Touch a parameter.

It highlights orange to show it is selected. Turn the Rotary to adjust its value.

key

- Press to open an option pop-up page for the currently selected screen. Its

function, if available, is shown in the screen toolbar above the key. For example, the

key provides quick access to the Libraries while in Processing screens.

Live mixing screens

- These screens provide quick access to live mixing

functions such as level control and signal processing:

Qu-Control - User assignable custom screen for simple

level, mute and on/off control. A user permission can be set

so that this is the only control available to the ‘Basic User’, for

example bar staff control of zone music source and level at a
venue.

Processing – Follows the active

Sel

key or button to open

the signal processing screens. This includes the Preamp,

Gate, Ducker, PEQ, GEQ, Compressor, Delay, FX

parameters and more.

Routing – Follows the active

Sel

key or button to open the

routing assignment screens.

Channel – Follows the active

Sel

key or button to open a

virtual ‘

fader strip

’ on screen. This replaces the physical

faders of the other Qu mixer models. It provides a way to

work with the faders when not mixing using an iPad.

The Channel screen presents tabs and Sel buttons to access

any Qu input or output channel, and the DCA and Mute

Group masters.

You can also use this screen to select a different

Mix

, for

example to adjust monitor or FX send levels.

SoftKeys

Touch Screen

Live mixing screens

System screens

ST3 Input

Custom Select keys

key

Copy/Paste/Reset keys

Screen rotary control

Qu-Drive USB

Phones

Alt Out

Channel screen

Channel select

Virtual fader strip

Mix select

Summary of Contents for Qu-16





























































































Search results

Summary of Contents for Qu-16

Reviews:

Related manuals for Qu-16

Brands by name

Popular brands

ALLEN & HEATH Qu-16, Reference Manual

Search results

Summary of Contents for Qu-16

Reviews:

Related manuals for Qu-16

Brands by name

Popular brands