4 Initial operation
© 2022 Interflex Datensysteme GmbH | IF-5835 Time Recording Terminal | 07.22
11
4 Initial operation
From a technical point of view, the terminals have an integrated controller. That is why the
term
Controller
will be used in this section.
Prerequisites
ü
Service
IF6040 Pki Service
installed
ü
IF6040 Tls Proxy
service installed
ü
Certificates set up for communication with the
application server
and for the TLS server (see
Security media center)
ü
Accessories for connecting host computer and controller (see below)
With the appropriate accessories (see table), the following options are available for connecting the
host computer to the controller:
ü
Via WLAN with the IF-ServiceApp 75-99-0013
ü
Via service interface or USB
Service interface
USB
IF-4xxx controller
75-4070-0001
service cable 4xxx (connection in housing)
IF-4070 controller
75-4070-0002
service cable 4xxx (connection via RJ45)
IF-5xxx terminal
75-99-0006
Service cable 5xxx
4.1 Connecting the controller to the network
You can connect the controller to the network via a service cable and the serial service interface or
via WLAN with the IF-ServiceApp.
Service interface
Accessing the controller via SSH requires the freeware PuTTY version 0.73 or higher:
1. Switching on the power supply
2. Establish serial connection between host computer and controller
3. Open PuTTY
4. Check and adjust parameters
