48
Motion Detect
0
The Motion Detect tab will be available if the Surveillance Mode is set to
Triggered
. This particular area allows users to customize sections of
detection and the sensitivity.
Figure 44.
Motion Detect
1.
Preview: Hit the
Refresh View
button to refresh the image
2.
Detection Settings: Allows custom areas to detect on the displayed
screen
Full Area Detection: Detects all areas on the screen
Custom Detection: Detects user created detection blocks
Add New Area: Creates a new block to detect. Hold down the
right mouse button over the displayed screen area to create a
new block
Delete Area: Select a block on the displayed screen and hit this
button to delete it
Delete All Areas: Deletes all blocks on the displayed screen
Test Detection: Test the detection by moving an object in front of
the camera, the blocks should change color when it detects
motion
3.
Sensitivity: Adjust the sensitivity of the motion detection
1
2
3
