background image

 

 

Digital Video Interfacing Products 

 

AT88IP 

TS-over-IP

  

Receiver/Converter/Recorder 
DVB-T2/T/C to DVB-ASI & IP Converter 
 
Pro-MPEG Code Of Practice #3(COP3) FEC 

 

 
 
          
 
 

      

 

 
 

Standard Features 

Application 

 

DVB-T2/T/C to IP & DVB-ASI Receiver, Recorder Converter.

 

- Receives DVB-T2/T/C TS & converts into ASI & IP in real time. 
- Records TS using Free application DVSStationIP. 

Web based Software

 as well as 

DVSStationIP.

 

DVSStationIP 

runs on 

Windows XP, Vista, Windows 7

- Remote Web-based configuration management. 
- Remote firmware upgrade. 
- Saved configuration settings. 
- No re-configuration needed after system reboot. 
- An alternative to dedicated satellite links. 
- Connects digital video equipment to computer networks. 
- Encapsulation of the TS data for Ethernet uses IP and the 

UDP)

,  

  with 

RTP 

encapsulation and Pro-MPEG 

COP3 FEC 

as an option.  

- Dedicated hardware performs the encapsulation,  
  which maximizes the throughput and minimizes latency. 

 

 

 

Targeted for Digital Video Professionals, 
Sophisticated End Users and OEMs  
the AT88IP is an ideal solution for a 
number of applications such as: 
- Development Tools. 

DVB to IP Gateway.

 

Video on Demand Server.

 

- Transport Stream Test Generator. 

Studio to Transmitter Links.

 

ENG

 (Electronic News Gathering) Stream  

  content to and from remote locations. 
- ASI input to Cable System. 
- Providing an ASI input for decoders,  
  Multiplexers, Modulators.

 

 
 

Specifications 

IP

 

- IP Maximum rate of up to 214 Mbps per ASI channel. 
- Network jitter correction. 
- Supports constant bit rate ASI output. 
- IP address assignment from DHCP server & static IP. 
- IP address also configurable through the web interface.  
- Configuration for Time To Live (TTL) for Multicast. 
 

DVB-T2/T/C Input

 

- RF Tuner Connector: 

75 Ohms IEC female Type.

 

- Loop Through Connector: 

75 Ohms IEC male Type

Input Frequency Range: 

High Band: 

434.0 MHz to 858.0 MHz. 

Mid Band: 

149.5 MHz to 426.0 MHz.

 

Low Band: 

50.5 MHz to 142.5 MHz.

 

- Channel Bandwidth: 

6, 7 & 8 MHz.

  

- RF Sensitivity: 

-80dBm

 

- COFDM Spectrum (DVB-T2/T):  

2k and 8k carriers non-hierarchical and hierarchical. 

- Modulation Modes: 

DVB-T/T2: QPSK, 16QAM, 64QAM

 

- Modulation Modes: 

DVB-C: 64QAM, 128QAM, 

256QAM 

- Guard Interval Modes

: 1/4, 1/8, 1/16, 1/32.

 

 

 

DVB-IP

 

Ethernet encapsulation:

 IEEE 802.2 SNAP, Eth. 

Encapsulation: 

UDP or RTP 

IP support:

 IPv4 

IP-address assignment: 

DHCP link local or static 

Multicast support: 

IGMPv2 

Date Rate: 

100/1000 

GigE port Physical layer: 

IEEE 802.3a 

GigE port Connector: 

RJ-45 with LEDs 

FEC:

 Pro-MPEG Code Of Practice #3(COP3) 

TSoverIP to ASI latency:

 Less than 1ms  

Jitter tolerance range: 

500ms  

DVB-ASI

 

Port Physical layer:

 EN50083-9  

Connector: 

75 Ohms Mini BNC 

- Input Return Loss: 

>15 dB. 

Input Signal level: 

800 mV +/- 10% 

Output Signal level: 

1.0Vp-p nominal.  

Input/Output Bit Rate: 

0 to 214 Mbit/s. 

DVB-T2/T/C

 

Standards: 

DVB-T2/T/C. 

 

 
 
 

 

© 2017 Alitronika DVS   AT88IP                                                                                                                    www.alitronika.com    

Summary of Contents for AT88IP






















Reviews: