35
23. 5Tone Encode
Set 5Tone is an Optional Signal for the current analog channel by using PC software.
Set “call” is a function of a programmed key.
Press the programed key to transmit the selected 5Tone. When squelch is opened at
the receiver side press [PTT] to talk.
24. Work alone
In the PC software
Public
Alarm settings
Work Alone, you have to set up the
response time, warning time and response method initially.
Turn on the work alone function for the current channel. When radio`s
predetermined time has been reached, the radio will beep a sound. At the time user has
to confirm by pushing the programmed work alone key to confirm continuing work
alone, otherwise, the radio will start alarm when reaching its preset response time.
9.6. Device Infor
Show the Radio ID, Radio name, model name, frequency range, firmware version,
hardware version, radio data version, latest program date, picture version, language
version etc.
9.7 Reset
One you select to reset all the data of memory channels, setting menus and all saved
data such as recording data, messages will be clear and reset to the manufactory
default setting.
Step 1.
Power off the radio firstly.
Step 2.
Press and hold [PTT] and the [PF1] button then turn power knob to power on
at the same time to enter the reset mode.
Step 3.
The radio will start up with a note on the display “Are you sure you want
to
intialize radio.?”
Press Exit to exit the reset and power on the radio.
Press Confirm to proceed the reset, it will come with a note - Initialize Radio.
Step 4.
After a re-start the radio will display the setting of time zone and the
date and
the time. Use the up-down key to set the current year. Move to the month by pressing
the PF1 key. Set the month, and use the PF1 key to move forward each step. Once
done, click
( MENU) key to save the date and time.
Please remember set up the time zone to avoid the date/time error. Make sure the
codeplug is saved to PC before your do the update and reset.
Summary of Contents for DJ-MD5X
Page 36: ...36 ...
