Setting up the monitor | 35
Connecting the computer
WARNING: Before you begin any of the procedures in this section,
follow the
NOTE: Do not connect all cables to the computer at the same time.
NOTE: The images are for illustration purposes only. The appearance of
the computer may vary.
To connect your monitor to the computer:
1.
Connect the other end of the DisplayPort cable (or Mini-DisplayPort to
DisplayPort) or HDMI cable to your computer.
2.
Connect the other end of the USB 3.2 Gen 1 upstream cable to an
appropriate USB 3.2 Gen 1 port on your computer.
3.
Connect the USB peripherals to the SuperSpeed USB 5 Gbps (USB 3.2
Gen 1) downstream ports at the bottom of the monitor.
4.
Plug the power cables for your computer and monitor into a wall outlet.
5.
Turn on the monitor and the computer.
If your monitor displays an image, installation is complete. If it does not
