About this task
The following images indicate the location of the processor and provide a visual representation of the installation procedure.
Steps
1. Ensure that the release lever on the processor socket is fully extended.
CAUTION: Position the processor correctly in the processor socket to avoid permanent damage to the processor.
2. Align the pin-1 corner on the processor with the pin-1 corner on the processor socket, and then place the processor in the
processor socket.
CAUTION: Ensure that the processor-cover notch is positioned underneath the alignment post.
3. Push the release lever down and place it under the tab next to the processor socket.
Next steps
1. Install the
processor liquid-cooling assembly
processor fan and heat-sink assembly
, as applicable.
2. Install the
3. Follow the procedure in
After working inside your computer
.
Wireless card
Removing the wireless card
Prerequisites
1. Follow the procedure in
Before working inside your computer
2. Remove the
.
About this task
The following images indicate the location of the wireless card and provide a visual representation of the removal procedure.
56
