Alienware Aurora R13 Service Manual Download Page 87 | Manualshive

Page: 87 / 105

background image

4. Click Drivers & downloads.
5. Click the Detect Drivers button.
6. Review and agree to the Terms and Conditions to use SupportAssist, then click Continue.
7. If necessary, your computer starts to download and install SupportAssist.

NOTE: Review on-screen instructions for browser-specific instructions.

8. Click View Drivers for My System.
9. Click Download and Install to download and install all driver updates detected for your computer.
10. Select a location to save the files.
11. If prompted, approve requests from User Account Control to make changes on the system.
12. The application installs all drivers and updates identified.

NOTE: Not all files can be installed automatically. Review the installation summary to identify if manual installation is
necessary.

13. For manual download and installation, click Category.
14. Click Video in the drop-down list.
15. Click Download to download the graphics driver for your computer.
16. After the download is complete, navigate to the folder where you saved the graphics driver file.
17. Double-click the graphics driver file icon and follow the instructions on the screen to install the driver.

Downloading the USB driver

Steps
1. Turn on your computer.
2. Go to

www.dell.com/support

.

3. Enter the Service Tag of your computer, and then click Submit.

NOTE: If you do not have the Service Tag, use the auto-detect feature or manually browse for your computer model.

4. Click Drivers & downloads.
5. Click the Detect Drivers button.
6. Review and agree to the Terms and Conditions to use SupportAssist, then click Continue.
7. If necessary, your computer starts to download and install SupportAssist.

NOTE: Review on-screen instructions for browser-specific instructions.

8. Click View Drivers for My System.
9. Click Download and Install to download and install all driver updates detected for your computer.
10. Select a location to save the files.
11. If prompted, approve requests from User Account Control to make changes on the computer.
12. The application installs all drivers and updates identified.

NOTE: Not all files can be installed automatically. Review the installation summary to identify if manual installation is
necessary.

13. For manual download and installation, click Category.
14. Click Chipset in the drop-down list.
15. Click Download to download the USB driver for your computer.
16. After the download is complete, browse the folder where you saved the USB driver file.
17. Double-click the USB driver file icon and follow the instructions on the screen to install the driver.

87

«
...
85
86
87
88
89
...
»

Summary of Contents for Aurora R13










































































































Reviews:

No comments

Related manuals for Aurora R13

Brand: Raven Pages: 34

Brand: Raven Pages: 8

TIGW1U - Carrier Grade Server

Brand: Intel Pages: 11

Brand: IBM Pages: 190

Brand: Gateway Pages: 134

Brand: Chipsee Pages: 21

Vaio VGN-CR515E

Brand: Sony Pages: 2

Brand: Larson Electronics Pages: 2

Brand: Onyx Pages: 2

Pavilion p6720f

Brand: HP Pages: 2

Pavilion p6710f

Brand: HP Pages: 2

Pavilion Media Center m260

Brand: HP Pages: 1

Brand: HP Pages: 1

Pavilion k300 - Desktop PC

Brand: HP Pages: 2

Pavilion j208cn

Brand: HP Pages: 1

Pavilion Home PC

Brand: HP Pages: 1

Pavilion h8-1120

Brand: HP Pages: 2

Pavilion Gaming 690

Brand: HP Pages: 7

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands