Alienware Area-51 R6, Service Manual

Page: 77 / 179

Replacing the wireless card
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
Before working inside your computer . After working inside your
computer, follow the instructions in After working inside your computer .
For more safety best practices, see the Regulatory Compliance home
page at www.dell.com/regulatory_compliance .
Procedure
1 Connect the antenna cables to the wireless card.
2 Align the notch on the wireless card with the tab on the wireless-card slot.
3 Insert the wireless card at an angle into the connector.
4 Replace the screw (M2x3) that secures the wireless card to the chassis.
A label at the tip of the antenna cables indicates the color scheme for the
wireless card supported by your computer.
Table 2. Antenna-cable color scheme
Connectors on the wireless card Antenna-cable sticker color
Auxiliary (1) Black
Main (2) White
Post-requisites
1 If you have multiple graphics cards, replace the graphics card. See “ Replacing
multiple graphics cards ”.
2 Replace the left and right side-panels. See “ Replacing the side panels ”.
3 Replace the stability foot .
77