UPMIDIAS
Replacing the speakers
WARNING: Before working inside your computer, read the
safety information that shipped with your computer and
Before working inside your computer
.
After working inside your computer, follow the instructions
After working inside your computer
practices, see the Regulatory Compliance home page at
www.dell.com/regulatory_compliance.
Procedure
1
Using the alignment posts, place the speakers on the computer base.
2
Route the speaker cable through the routing guides on the battery and
computer base.
3
Adhere the front AlienFX LED cable to the battery.
4
Connect the front AlienFX LED cable to the system board and secure it with
the tape.
5
Connect the speaker cable to the system board.
Post-requisites
1
Follow the procedure from step 5 to step 11 in “Replacing the
2
Replace the
.
3
Replace the
.
4
Replace the
.
70
Summary of Contents for 15 R2
Page 55: ...UPMIDIAS 8 Disconnect the interposer from the hard drive 1 interposer 2 hard drive 30...
Page 72: ...UPMIDIAS 5 Lift the touch pad off the palm rest assembly 1 palm rest assembly 2 touch pad 47...
Page 159: ...UPMIDIAS 4 Lift the battery off the computer base 1 screws 2 2 battery 3 computer base 134...
Page 162: ...UPMIDIAS 1 computer base 137...
