Alied Telesis GS970M/10, Command Reference Manual

Page: 1811 / 1890

49
C613-50163-01 Rev C Command Reference for GS970M Series 1811
AlliedWare Plus™ Operating System - Version 5.4.7-0.x
Trigger Commands
Introduction
Overview This chapter provides an alphabetical reference for commands used to configure
Triggers. For more information, see the
Triggers Feature Overview and
Configuration Guide .
For information on filtering and saving command output, see the “Getting Started
with AlliedWare Plus” Feature Overview and Configuration Guide .
Command List • “ active (trigger) ” on page 1813
• “ day ” on page 1814
• “ debug trigger ” on page 1816
• “ description (trigger) ” on page 1817
• “ repeat ” on page 1818
• “ script ” on page 1819
• “ show debugging trigger ” on page 1821
• “ show running-config trigger ” on page 1822
• “ show trigger ” on page 1823
• “ test ” on page 1828
• “ time (trigger) ” on page 1829
• “ trap ” on page 1831
• “ trigger ” on page 1832
• “ trigger activate ” on page 1833
• “ type atmf node ” on page 1834
• “ type card ” on page 1837
• “ type cpu ” on page 1838
• “ type interface ” on page 1839