C613-50163-01 Rev C
Command Reference for GS970M Series
1230
AlliedWare Plus™ Operating System - Version 5.4.7-0.x
RADIUS C
OMMANDS
SHOW
DEBUGGING
RADIUS
show debugging radius
Overview
This command displays the current debugging status for the RADIUS servers.
Syntax
show debugging radius
Mode
User Exec and Privileged Exec
Example
To display the current debugging status of RADIUS servers, use the command:
awplus#
show debugging radius
Output
Figure 34-1:
Example output from the
show debugging radius
command
RADIUS debugging status:
RADIUS event debugging is off
RADIUS packet debugging is off
