
45
Alibi™ NVR Firmware V3.6.22 User Manual
4.3 Live View settings
Live View settings can be customized according to differing needs. You can configure the screen frame split, placement of camera
channels on the screen, dwell time for screen to be shown, mute or turning on the audio, the screen number for each channel, etc.
1. Open the Live View Settings menu. Go to
Menu | Configuration | Live View
Adjust the settings in the screen as needed:
—
Video Output Interface
: Designates the output to configure the settings for. Options include VGA/HDMI1?LCD/
Channel-Zero and HDMI2.
—
Live View Mode
: Designates the display mode (screen split) to be used for Live View.
1 * 1
is a single camera view.
Several options are available.
—
Dwell Time
: The time in seconds to dwell between switching channels when auto-switch is enabled in Live View.
—
Enable Audio Output
: Enables/disables audio output for the selected video output.
—
Volume
: When Audio Output volume is enabled, use the slider to adjust the volume.
—
Event Output
: Designates the output to show event video. Option includes only VGA/HDMI.
—
Full Screen Monitoring Dwell Time
: The time in seconds to show alarm event screen.
2. After changing settings in the screen shown above, click
Apply
, and then click
Back
.
3. Click the
View
tab at the top of the screen.
SECTION 4: LIVE VIEW INTERFACE
Summary of Contents for ALI-NVR71128R
Page 8: ...viii www Observint com NOTES ...
Page 232: ...224 www Observint com ...