background image

23

Alibi™ NVR Firmware V3.6.22 User Manual

e.  Click the 

Linkage Action

 tab. In this tab you can cause certain actions to occur when video loss occurs. 

f.  Select the actions you want to occur, then click 

Apply

 to save your settings, and 

OK

 to return to the 

Video Loss

 menu. 

The 

Notify Surveillance Center

 and 

Send Emai

l options require additional network settings. 

4.  In the 

Video Loss

 menu, click 

Apply

 to save your settings for this camera. 

5.  Repeat sub-steps 

2

 through 

4

 above for each camera managed by the NVR.  

2.3.8  VCA

The VCA (Video Content Analysis) features of the NVR are used to configure the VCA features in the camera. The NVR can then 
retrieve VCA event information from the camera for triggering recording, reporting, generating alerts, etc. The NVR can only 
configure those VCA features supported by the camera; all VCA features are not supported by all cameras. VCA features supported 
of the camera can also be configured through remote login to the camera, where available. The recorders support the following VCA 
features: 

Face Detection

Region Entrance Detection

Object Removal Detection

Sudden Scene Change

Line Crossing Detection

Region Exiting Detection

Audio Exception Detection

PIR alarm

Intrusion Detection 

Unattended Baggage Detection

Defocus Detection

For more information about configuring VCA features, refer to “SECTION 6 VCA Features” on page 61. 

2.4  Adding cameras manually 

IP cameras can connect to the NVR either through the 4-, 8-, or 16-port integrated Ethernet switch on the back panel of the NVR, or 
through the LAN the NVR is connected to. IP cameras connected to the IP ports on the NVR back panel are automatically added to 
the system by the NVR. Cameras that exist on the LAN can be added manually through the NVR startup Wizard or Camera menus. 

SECTION 2: INITIAL NVR SETUP 

Summary of Contents for ALI-NVR71128R









































































































































































































































Reviews: