manualshive.com logo in svg

ALIBI ALI-NVR71128R, User Manual, Page: 101 / 232

Share
Download
ALIBI ALI-NVR71128R User Manual Download Page 101

93

Alibi™ NVR Firmware V3.6.22 User Manual

g.  Select the actions you want to occur, then click 

Apply

 to save your settings. 

h.  Click 

OK

 to return to the VCA menu. 

9.  In the VCA menu, click 

Apply

 to activate the settings.

10.  Repeat steps 5 through 9 above to configure other cameras. 

6.9  Defocus Detection

Defocus Detection senses when image blur, caused by defocus of the lens, occurs. Certain actions can be taken when the alarm is 
triggered. To configure Defocus Detection: 

1.  Open the VCA menu. Go to 

Menu | Camera Management | VCA

.

2.  On the 

Camera

 line, open the drop down list, and then select the camera you want to configure. 

3.  Check the 

Save VCA Picture

 box to capture a live view image of the VCA event. 

4.  In the VCA type selection line, click on 

Defocus Detection

. If the camera supports this feature, it will be highlighted. 

SECTION 6: VCA FEATURES

Summary of Contents for ALI-NVR71128R









































































































































































































































Reviews:

No comments