ALGE-Timing TDC8001, Manual

Page: 70 / 112

Manual
TdC 8001
-70-
6.4 Dual Timer, Program 6
Net timing with intermediate times on two courses with one competitor each on the course. The start
can be effected at the same time for both courses or separately. The evaluation can be carried out for
each course separately or jointly. Two heats are possible.
Activation procedure:
−
Turn on TdC 8001 (switch g)
− select program DUAL TIMER (prog.no. 6) with

and

, <ENTER>
−
clear storage for used race, <ENTER>
−
select race, <ENTER>
− select precision, <ENTER>
− <YES>, if groups are to be entered, otherwise <NO> and <ENTER>.
−
always input last number of group
−
confirm every input with <ENTER>
− after the entering start number of last group, press <ENTER>
− synchronize TdC 8001 (possibly with other
ALGE
timing devices)
− press <F1> to confirm displayed day time
− At next full minute a start impulse is output via channel c0.
−
TdC 8001 is ready for timing.
−
press <F2> if display (5) shows wrong time of day
−
enter time with finish keypad (8) and confirm with <ENTER>
− start clock with start signal (<START> or channel c0)
Race procedure in 1 st heat:
−
enter start number for blue (left) course with keypad (12) and confirm with <ENTER>
− display (1) must show start number (and group) of blue (left) course.