TdC 8000 for Equestrian
Page 44
Version:E-00-08-08
Page 44
6.1.1.
Standard Show Jumping Table A1:
Program 111
Show Jumping Table A1:
Stage: ranking by points
no jump off
Penalty Points (standard set-up):
for obstacle drop:
4 points
for time violation:
1/4 point per started second (adjustable)
Adjustment:
-
Switch TdC 8000 on (switch 26)
-
Select program 11 "Show Jumping" with cursor key (
o
and
p
)
-
Press <ENTER>
-
Select program 111 "Table A" with cursor key (
o
and
p
)
-
Press <ENTER>
-
Select race that you want to use and clear memory (e.g. <F1> for race 1)
-
Press <ENTER>
-
Select race (e.g. <F1> for race 1)
-
Press <ENTER>
-
Select the precision with key <F1> to <F4>. Standard is <F3> with 1/100 seconds
-
Press <ENTER>
-
Select the timing mode (we recommend <F2> for Difference Timing")
-
Press <ENTER>
-
Synchronize the TdC 8000 (with time of day and other timing devices)
-
press <F1> if the finish display (7) shows the correct time of day
-
wait until TdC 8000 gives at the next full minute the synchronize signal to external devices
(you are now ready for timing)
-
press <F2> if the finish display (7) shows the wrong time of day
-
input the time of day, confirm it with <ENTER> and make a start signal (channel 0 or
press <START>
-
Press <ALT> and <MENU> together.
-
Adjust menu 36, 37, 39, 41, 42, 43 and 45 as required by the circumstances of your event
(see next page).
-
Exit the menu when you did all adjustments with <NO>.
Race operation:
-
Input the start number for the start with start keyboard (9)
-
Confirm with <ENTER>
-
The start-display (2) must show the correct start number
-
Display (7) must show the correct countdown time (e.g. 60 seconds)
-
Display (8) shows the penalty points and penalty seconds
-
Clear the start by pressing <START> (or handswitch on channel 9). The countdown starts.
-
The loudspeaker honks (if connected to socket 25) and gives the start free signal
-
Display (7) shows the countdown
-
If the rider does not pass the start photocell before the end of the countdown it will honk at
the zero time
-
When the rider passes the start photocell it will start the time (display 7),
or after expired count down time. (If Auto-Start is ON)
Input penalty points (obstacle drop) by pressing <ENTER> (keyboard 15)
Start
Finish
Obstacles
1
2
3
4
5
6
7